No products in the cart.
No. 381 Manual Roll Bending Machine
$1,386.00
The No. 381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rollers are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 22 gauge mild steel.
Additional information
| Weight | 245 lbs |
|---|---|
| Dimensions | 55 × 11 × 15 in |
| Maximum capacity, mild steel | 22 ga/ 0.76 mm |
| Maximum forming length | 36 in/ 915 mm |
| Roll diameter | 2 in/ 50 mm |
| Minimum forming radius | 1 in/ 25 mm |
| Wiring grooves | 3/16, 1/4, 5/16/ 5, 6.5, 8 mm |
You may also like…
Related products
-
Add to cartNo.416 Heavy Duty Welded Floor Mount Stand
$540.00 -
Add to cartPexto SR-12
$530.00Pexto SR-12
The Pexto SR12 comes with high carbon, precision turned rolls that are ground to high finish. All gears are fully enclosed in housings and the upper roll is lifted with a cam-lever for ample clearance and removal of a full length work piece. Wiring grooves in the bottom and rear rolls are 1/8″ and 1/16″.$530.00 -
Add to cartNo. 0381 Manual Roll Bending Machine
$1,455.00No. 0381 Manual Roll Bending Machine
The No. 0381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 42″ with a thickness capacity of 24 gauge mild steel.$1,455.00