AutoKut Plus

The brand-new AutoKut Plus Slit-to-Width and Cut-to-Length Line comes with an array of features and automation. The straightening and feed rollers and slitting shaft adjustments are automatically controlled with the touch of a button as opposed to manually adjusted via levers and gauges. It is intelligently engineered and economically priced for all of its users needs, designed for long term serviceability with all mechanisms on the outside of the machine. Slitter and guillotine blade changes are easy to perform and do not require disassembly of machine.

The AutoKut Plus is designed so that is can be operated on either side of the machine, and the touchscreen operator interface is easy to use. It has a maximum speed of 85 ft per minute and can accommodate coils up to 49″ wide. Materials can be slit in thicknesses up to 20 gauge mild steel and blanked in thicknesses up to 18 gauge. The AutoKut Plus comes standard with 5 pairs of slitting blades, the slitter blades can be re-positioned quickly and accurately with the simple setup gauge. Shear cycle time is approximately 1 second.

Categories: ,


AutoKut Plus Slitter & Cut to Length Line Features:

  • Automatic adjustment of the straightening and feeding rolls, slitter shaft
  • Quick change two-piece slitter knife system- full repositioning of knifes in less than 3 minutes
  • Adjustable slitting knife depth based of material thickness to eliminate chamber of the work piece
  • Gibb slitter knife engagement which eliminates side movement of the knifes helps ensure long blade life
  • Quick release with locks, fully adjustable coil guides prevent material side movement
  • Adjustable deflection rollers to better support the infeed of material from the coil
  • Durable powder coated surface finish
  • Sight-line visibility of feed materials
  • Safety interlock system designed to CE Standards
  • World renowned Schneider electrical components
  • Easy to use Schneider operator interface with light tower prompts
  • Material saving features including auto-clean cut alert at the jobs end to eliminate waste
  • Variable speed drive enabling long lengths to be produced more quickly and more accurately
  • Automatic material length calibration
  • Variable speed acceleration for use with a wide variety of decoiler designs
  • Adiprene coated feed rolls with cam adjustment for raising and lowering prevents marking of materials
  • Two over one straightening rolls with automatic adjustment for accurate repeat setups
  • Integrated electro-mechanical shear design for fast, quiet shear operation
  • Two cutting edge top and bottom shear blades
  • Decoiler options available

Start Your Quote

Additional information

Weight 4055 lbs
Dimensions 72 × 66 × 46 in
Maximum Slitting Capacity (1-2 Knifes Engaged)

Mild Steel – 20 gauge / 1.0mm

Stainless Steel – 24 gauge / 0.61mm

Aluminum – 18 gauge / 1.25mm

Maximum Blanking Capacity

Mild Steel – 18 gauge / 1,25mm

Stainless Steel – 22 gauge / 0,76mm

Aluminum – 16 gauge / 1,61mm

Maximum Material Width

49.250” / 1250 mm

Minimum Material Width

8” / 200 mm

Number of Straightening Rolls

3 (1 over 2)

Minimum Slit Width

2 3/8” / 60 mm

Minimum Edge Trim

¼” / 6.4 mm

Number of Slitting Knives


Slitting Speed Variable

85 FPM / 25 MPM

Drive Motor

3 hp / 2.2 kw

Guillotine Motor

2 hp / 1.5 kw