|Dimensions||26 × 2 × 6 in|
1 3/4 in/ 44.5 mm
5/8 in/ 15.9 mm
26 in/ 660.4 mm
3" x 20 gauge mild steel/ 76 mm x 1.00 mm mild steel
No. 9 Universal Button Punch
The No. 9 Universal Button Punch is used to indent several thicknesses of metal, forming a 3/8″ dia. button or dimple that holds the pieces together securely. A common use is on standing seams on roofs to make a watertight fastening. The head of the punch rotates to any position. The ends of the jaws are offset at a 30° angle, permitting close quarter work and a clear view.
You may also like…
The No. XX has a deeper throat configuration than the No. 5 and can punch up to 3 1/4″ from the edge of the piece. The No. XX can also be used to punch light channels with a 1″ minimum inside dimension an a 1 3/8″ maximum flange. The No. XX is also available as a kit with a standard assortment of round punches and dies in a durable plastic box. Includes one 5/32″, 7/32″ 9/32″, 11/32″, 15/32″, nd 17/32″ round punch and die.
The No. 20CTL punch offers 20 tons of punching power to meet heavier job requirements, and greater versatility in punching flat sheets and angles. Includes one 1/2″ round punch and die set.
No. 20 and No. CTL20 are similar, except that the frame around the die pocket of the CTL20 is machined to allow punching close to the web of angle iron (9/16″ from web to center of hole).
Options for these tools include a ratchet attachment (for No. 20 and No. CTL20) to permit operation in close quarters and a pipe handle to provide adequate leverage with minimal effort.