Showing all 9 results

No. 455 Combination Angle Iron Shear, Notcher, Bender

$3,275 + Freight

The  No. 455 is a must whenever angle iron is fabricated. It consists of No. 4 Angle Iron Shear, No. 50 Angle Iron Notcher and No. 51 Angle Iron Bender, all mounted on a sturdy work station. 72″ operating bar handle included. This all in one unit ideal for use on a job site, mounted in the back of a truck, or used in a job shop.

No. 55 Adjustable Bar Folder

$5,850 + Freight

The No. 55 bar folder is a versatile, adjustable machine that performs many essential sheet metal operations using one motion to clamp and fold. The No. 55 accommodates up to 36 inch material with a maximum of 20 gauge. A quick set back gauge is included. There is also an optional floor stand.

No. 63 Adjustable Bar Folder

$4,275 + Freight

Pexto Tools and Machines
The No. 63 bar folder is a versatile, adjustable machine that performs many essential sheet metal operations using one motion to clamp and fold. The No. 63 accommodates up to 30 inch material with a maximum of 22 gauge. A quick set back gauge is included. There is also an optional floor stand.

No. 55 Floor Stand

$570 + Freight

Floor stand for mounting of the No. 55.

No. 63 Floor Stand

$575 + Freight

Floor stand for mounting of the No. 63.

CB3020 Cleat Bender- 30” 20GA

$1,650 + Freight

The CB3020 cleat bender is a manually operated tool that form uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.

CB3020 Floor Stand

$530 + Freight

Floor stand to mount the CB3020 cleat bender.

CH2420 Cheek Bender

$1,010 + Freight

The CH2420 cheek bender is a rugged tool built for increased productivity while getting the most consistent bends quickly. This model’s two-way trunnion design holds the bending apron steady at the base of the bend ensuring accuracy throughout the length of the sheet. To change the flange height, the shims are set at the factory to run a flange of 3/16 inch. This dimension can be changed in the following manner: remove t 4 hex bolts on the top plate and change to desired dimension. The adjustable shim will give a range or 3/16 to 5/16 of an inch. This procedure may be done on left and right top plates if desired.

No. 51 Angle Iron Bender w/Handle

$975 + Freight

The No. 51 angle iron bender is a companion tool to the No. 4 angle iron shear and No. 50 angle iron notcher. It will bend all sizes of angle iron within the rated capacity as well as flat bar. It includes a 32″ operating bar handle.