Pexto manual slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty cast iron end frames and a welded steel base to make an accurate and durable forming tool. Wire grooves are also standard.

Showing all 10 results

No. 0381 Manual Roll Bending Machine

$1,650 + Freight

The No. 0381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 42″ with a thickness capacity of 24 gauge mild steel.

No. 381 Manual Roll Bending Machine

$1,575 + Freight

The No. 381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rollers are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 22 gauge mild steel.

No. 383 Manual Roll Bending Machine

$1,245 + Freight

The No. 383 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 24″ with a thickness capacity of 20 gauge mild steel.

No. 390 Manual Roll Bending Machine

$4,730 + Freight

The No. 390 manual roll has 2 1/2″ precision turned and ground high carbon steel rollers. There are four wiring grooves 1/4″, 9/32″, 5/16″ and 3/8″. All rolls are standard wih fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 16-18 gauge mild steel.

No. 392 Manual Roll Bending Machine

$5,075 + Freight

The No. 392 manual roll has 2 1/2″ precision turned and ground high carbon steel rollers. There are four wiring grooves 1/4″, 9/32″, 5/16″ and 3/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 48″ with a thickness capacity of 20-22 gauge mild steel.

No. 416 Manual Roll Bending Machine

$4,635 + Freight

The No. 416 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 14-16 gauge mild steel.

No. 418 Manual Roll Bending Machine

$4,835 + Freight

The No. 418 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 48″ with a thickness capacity of 16-18 gauge mild steel.

Pexto SR-12 Manual Slip Roll

$605.00

The Pexto SR-12 12″ manual slip roll is a great economical solution for small shops, vocational schools and more. The SR-12 comes with high carbon, precision turned rolls that are ground to high finish. All gears are fully enclosed in housings and the upper roll is lifted with a cam-lever for ample clearance and removal of a full length work piece. Wiring grooves in the bottom and rear rolls are 1/8″ and 1/16″.

No. 416 Heavy Duty Welded Floor Mount Stand

$610 + Freight

Floor stand to mount the No. 416 roll.

No. 418 Heavy Duty Welded Floor Mount Stand

$670 + Freight

Floor stand to mount the No. 418 roll.