No products in the cart.
No. 383 Manual Roll Bending Machine
$1,095.00
The No. 383 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 24″ with a thickness capacity of 20 gauge mild steel.
Additional information
| Weight | 188 lbs |
|---|---|
| Dimensions | 43 × 11 × 15 in |
| Maximum capacity, mild steel | 20 ga/ 1.00 mm |
| Maximum forming length | 24 in/ 610 mm |
| Roll diameter | 2 in/ 50 mm |
| Minimum forming radius | 1 in/ 25 mm |
| Wiring grooves | 3/16, 1/4, 5/16 in/ 5, 6.5, 8 mm |
You may also like…
Related products
-
Add to cartNo.416 Heavy Duty Welded Floor Mount Stand
$540.00 -
Add to cartPexto SR-12
$530.00Pexto SR-12
The Pexto SR12 comes with high carbon, precision turned rolls that are ground to high finish. All gears are fully enclosed in housings and the upper roll is lifted with a cam-lever for ample clearance and removal of a full length work piece. Wiring grooves in the bottom and rear rolls are 1/8″ and 1/16″.$530.00 -
Add to cart
No.418 Heavy Duty Welded Floor Mount Stand
$578.00