No products in the cart.
PS-66 Notcher
$1,231.00 – $1,338.00
Designed to handle the many small, diversified jobs in the sheet metal shop, the Pexto PS-66 is the only machine that combines notching and coping into one compact unit. It can also be used for shearing strip and box corner tab notching.
Description
The PS-66 features a work table with edges machined squared for accurate and convenient gauge setting, reversible upper blades, 4-edge lower blades, and shatter-proof finger guard. This machine is hand operated, bench or floor mounted and has adjustable gauge stops, replaceable blades and finger guards. Blades may be mounted for conventional splay cutting, starting at the outside edges, shearing to apex, or for pierce cutting, starting at apex and shearing to outside edges. Pierce cutting permits shearing inside the blank and coping. The PS-66 can cut a full 6″ x 6″ corner notch in one stroke. Saves the 6″ x 6″ cut out blank. By removing one frame bolt, the PS-66 will shear or square 6″ material of any length.
Additional information
| Weight | 200 lbs |
|---|---|
| Dimensions | 23 × 24 × 21 in |
| Maximum shearing capacity, mild steel (splay-cut) | 16 ga/ 1,60 mm |
| Maximum shearing capacity, mild steel (pierce-cut) | 18 ga/ 1,25 mm |
| Maximum notch | 6 x 6 in x 90 degrees/ 152 x 152 mm x 90 degrees |
| Stroke | 3/4 in / 19 mm |
| Shearing width (any length) | 6 in/ 152 mm |
You may also like…
Related products
-
Add to cartNo. 50 90 Degree Lower Blade
$296.00 -
Add to cartPS-66 Replacement Lower Box Flange Blade Set
$287.00 -
Add to cartNo. 50 Angle Iron Notcher w/Standard Equipment
$1,204.00No. 50 Angle Iron Notcher w/Standard Equipment
The No. 50 Angle Iron Notcher is a useful tool for notching or coping angle iron. It can be used in the shop or on the job site, Coping and special degree notching blade and dies are available.
$1,204.00