Additional information
Weight | 44 lbs |
---|---|
Dimensions | 14 × 13 × 9 in |
Maximum shearing capacity, mild steel | 2" x 2" x 1/4" |
No products in the cart.
$867.00
The No. 51 angle iron bender is a companion tool to the No. 4 angle iron shear and No. 50 angle iron notcher. It will bend all sizes of angle iron within the rated capacity as well as flat bar. It includes a 32″ operating bar handle.
Weight | 44 lbs |
---|---|
Dimensions | 14 × 13 × 9 in |
Maximum shearing capacity, mild steel | 2" x 2" x 1/4" |
The No. 455 is a must whenever angle iron is fabricated. It consists of No. 4 Angle Iron Shear, No. 50 Angle Iron Notcher and No. 51 Angle Iron Bender, all mounted on a sturdy work station. 72″ operating bar handle included. This all in one unit ideal for use on a job site, mounted in the back of a truck, or used in a job shop.
The CH2420 cheek bender is a rugged tool built for increased productivity while getting the most consistent bends quickly. This model’s two-way trunnion design holds the bending apron steady at the base of the bend ensuring accuracy throughout the length of the sheet. To change the flange height, the shims are set at the factory to run a flange of 3/16 inch. This dimension can be changed in the following manner: remove t 4 hex bolts on the top plate and change to desired dimension. The adjustable shim will give a range or 3/16 to 5/16 of an inch. This procedure may be done on left and right top plates if desired.
The No. 55 bar folder is a versatile, adjustable machine that performs many essential sheet metal operations using one motion to clamp and fold. The No. 55 accommodates up to 36 inch material with a maximum of 20 gauge. A quick set back gauge is included. There is also an optional floor stand. In stock and ready to ship.