No products in the cart.
PX1010-R
Pexto PX Series mechanical shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The PX1010 has an oversized motor and gear box making the machine capable of 45 strokes per minute. The PX1010 is ideal for high volume applications and the rated capacity is 10-gauge mild steel, 12-gauge stainless up to 121” inches in cutting length.
Description
The PX1010 has a standard 30” powered back gauge system available. The screw-driven back gauge provides quick, accurate cuts. The operator simply pushes a button to drive the back gauge to the proper position and can fine tune the dimension using the hand wheel.
The PX Series shears standard features include four-edge, high carbon, high chrome blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined T-Slotted table. The table also has a hand well with dual inch/metric inlaid bed scales. The PX Series incorporates non-metallic ram gibs and low maintenance garlock bearings.
To enhance productivity, the PX series can be delivered in a “Pro Package” configuration. The Pro Package includes: 5’ Squaring Arm, Two Front Support Arms, Rear Drop Air Operated Sheet Support System and the 30″ Front Operated Powered Back gauge with Digital Readout.
Additional information
| Weight | 9200 lbs |
|---|---|
| Dimensions | 48 × 72 × 144 in |
| Maximum shearing capacity, mild steel rated materials at 80,000 tensile/ 44,000 yield | 10 ga/ 3,5 mm |
| Maximum shearing capacity, stainless steel rated materials at 90,000 tensile/ 55,000 yield | 14 ga/ 2,0 mm |
| Maximum cutting length | 121 in/ 3074 mm |
| Back gauge range | 30 in/ 762 mm |
| Strokes per minute | 45 |
| Number of hold-down feet | 16 |
| Drive motor - 230/460v, 3-phase, 60 Hz | 7.5 hp x 2 |
| Back gauge motor - 230/460v, 3-phase, 60 Hz (if equipped) | 1/4 hp |
| Floor space, gauges in position | 145 x 78 x 60 in |
Related products
-
Add to cartNo. 4 Angle Iron Shear w/ Standard Blade & 72″ Handle
$589.00No. 4 Angle Iron Shear w/ Standard Blade & 72″ Handle
The No. 4 shear with its standard blade is expressly designed to cut up to 2″ x 2″ x 1/4″ angle iron and produces a clean, burr-free cut every time. In stock and ready to ship.$589.00 -
Add to cart4 Foot Squaring Arm
$851.00 -
Add to cart911 Radius Master w/ 11 Radii, 1/8″ – 1″
$7,864.00911 Radius Master w/ 11 Radii, 1/8″ – 1″
Roper Whitney’s Radius Master is a must for every fabricating shop. It’s a hydraulically operated, self contained unit for making radii in mild steel from 27 gauge up to 7 gauge without having to make blade adjustments and no setup. The Radius Master comes standard with 11 radii from 1/8″ to 1″ – 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, & 1″. Special size radii may also be ordered up to 3″ maximum radii. Specifications: Operated on 115 volts 1.0 amp and 80 psi shop air with safety foot switch as standard equipment.$7,864.00